background image

E-Gel

®

 Go! Base

 

with the E-Gel

®

 Adaptor Base

©2011 Life Technologies corporation. All rights reserved. The trademarks mentioned herein are the property of Life 

Technologies corporation or their respective owners.

For technical support, email [email protected]

For country-specific contact information, visit www.invitrogen.com. 

To reorder visit www.invitrogen.com

Limited Use Label License:

 

Research Use Only

: The purchase of this product conveys to the purchaser the 

limited, non-transferable right to use the purchased amount of the product only to perform internal research 
for the sole benefit of the purchaser. No right to resell this product or any of its components is conveyed 
expressly, by implication, or by estoppel. This product is for internal research purposes only and is not for use 
in commercial services of any kind, including, without limitation, reporting the results of purchaser’s activities 
for a fee or other form of consideration. For information on obtaining additional rights, please contact outli-
[email protected] or Out Licensing, Life Technologies, 5791 Van Allen Way, Carlsbad, California 92008. 

Limited 

Use Label 

License

Page 4

The E-Gel

®

 Go! Base can be used with the 

E-Gel

®

 Imager Adaptor Base either with 

or without the E-Gel

®

 Go! Portable 

Battery Pack. 
When not using the Portable Battery Pack,  
the E-Gel

®

 Imager Adaptor Base can be 

used to provide power for the E-Gel

®

 Go! 

Base.

Installing the 

E-Gel

®

 Go! 

Base with 

the E-Gel

®

 

Imager 

Adaptor Base

1.  Place the E-Gel

®

 Go! Base into the well of the E-Gel

®

 Imager 

Adaptor Base on the dedicated peg niches. 

2.  Connect the DC Connector Cable between the E-Gel

®

 Go! Base and 

the E-Gel

®

 Imager Adaptor Base.

3.  Connect the E-Gel

®

 Go! Base power supply cable to the 48 V power 

port at the rear of the E-Gel

®

 Imager Adaptor Base.

4.  The E-Gel

®

 Go! Base is now ready for use with the E-Gel

®

 Imager 

system.

DC Connector 

Cable

E-Gel

®

 Imager 

Adaptor Base

E-Gel

®

 iBase

 Device

E-Gel ImagerBase.indd   4

8/10/2011   4:15:33 PM

All manuals and user guides at all-guides.com

Summary of Contents for Invitrogen E-Gel 4466602

Page 1: ...niversal 12 V Power Cord 1 1 4466604 E Gel Imager Adaptor Base DC Connector Cable 1 1 Kit contents ON OFF Power Button Directions for installation of the E Gel Safe Imager E Gel iBase Device and E Gel Go Base with the E Gel Imager UV Blue Light Base or E Gel Imager Adaptor Base are described below For detailed instructions refer to the E Gel Imager Gel Documentation System manual included in the s...

Page 2: ...e and the E Gel Imager Adaptor Base 3 Connect the E Gel iBase power supply cable to the 48 V power port at the rear of the E Gel Imager Light Base 4 The E Gel iBase Device is now ready for use with the E Gel Imager system E Gel Imager Adaptor Base E Gel iBase Device The E Gel Safe Imager can be used with the E Gel Imager Adaptor Base to provide transillumination for imaging with the E Gel iBase De...

Page 3: ...mager system 1 Place the E Gel Safe Imager into the well of the E Gel Imager Adaptor Base 2 Connect the DC Connector Cable between the E Gel Safe Imager and the E Gel ImagerAdaptor Base 3 Connect the E Gel Safe Imager Plug B to the E Gel iBase Device Plug A Plug B DC Connector Cable E Gel Imager Adaptor Base E Gel iBase Device E Gel Safe Imager 4 Connect the E Gel iBase power supply cable to the 4...

Page 4: ...sults of purchaser s activities for a fee or other form of consideration For information on obtaining additional rights please contact outli censing lifetech com or Out Licensing Life Technologies 5791 Van Allen Way Carlsbad California 92008 Limited Use Label License Page 4 The E Gel Go Base can be used with the E Gel Imager Adaptor Base either with or without the E Gel Go Portable Battery Pack Wh...

Reviews: