17
XT-36
1. ENTER:
In "stop" mode (display STOP), press ENTER button to enter into program selection and
setting value which will flash in the relevant window.
A:
Whilst selecting a program, press Enter to confirm the desired program
B:
When setting data, press ENTER to confirm the value that you would like to preset.
During the start mode (display START), press ENTER to choose display the speed or RPM, or
switch automatically.
2. START/STOP:
Press START/STOP button to start or stop the programs.
During any mode, hold down this button for 2 seconds to completely reset the computer.
UP:
In stop mode when the dot matrix is flashing, press this button (or rotate clockwise) to cycle
the programs upwards. If the related segment value is flashing, press this button (or rotate
clockwise) to increase the value.
During the start mode (display START), press this button (or rotate clockwise) to increase the
training resistance.
DOWN:
In stop mode and the dot matrix character flash, press this button (or rotate anticlockwise) to
cycle the programs downwards. If the related window value flash, press this button (or rotate
anticlockwise) to decrease the value.
During starting mode (display START), press this button (or rotate anticlockwise) to decrease
the training resistance.