Life Span Premier Owner'S Manual Download Page 19

Page: 19 / 21

PREMIER

6. Belt Tracking Adjustment:

This treadmill is designed to keep the belt reasonably centred while in use. It is normal for some belts to drift

near one side while the belt is running with no one on it. After a few minutes of use, the belt should have a

tendency to centre itself. If during use, the belt continues to move toward one side, adjustments are

necessary. The procedures are below:

1. Set speed at approximately 3.5km/h.

2. Check the side the belt shifts to.

If the belt shifts to right, tighten the right bolt and loosen the left bolt by using 6mm Allen Key, until the belt is

centred itself; If belt shifts to left, tighten the left bolt and loosen the right bolt by using a 6mm Allen Key, until

the belt is centred. When adjusting the belt using the 6 mm Allen Key, it is important to adjust the belt in half

turn increments. Over adjusting the belt can cause damage to the mat.

If belt drifts to the LEFT

If belt drifts to the RIGHT

Summary of Contents for Premier






















Search results

Summary of Contents for Premier

Reviews:

Related manuals for Premier

Brands by name

Popular brands

Life Span Premier, Owner'S Manual

Search results

Summary of Contents for Premier

Reviews:

Related manuals for Premier

Brands by name

Popular brands