Included In the Box
Items Required For Mounting
Getting Started
1.
Unpack your heater and any packing materials
2.
If all items are enclosed, thoroughly Inspect the heater for any shipping damage (cracks, dents, broken
power buttons, etc.) prior to doing anything else. If it was damaged in transit, contact your place of
purchase immediately.
1.
Main Components:
·
(Qty 1) Panel Heater
·
(Qty 1) Instruction Manual
2.
Mounting Hardware Pack Consisting of
:
·
(Qty 4) Plastic Mounting Posts w/ Built-In Wall Achor
·
(Qty 1) Drill Bit
·
(Qty 4) Long Mounting Screws
·
(Qty 4) Plastic Screw Head Caps
2 People (to help hold it)
·
Mounting Hardware Pack
·
Power Drill ·
Medium Phillips Screwdriver
·
Small
Level
·
Pencil for marking the wall (if you think you may have to erase) or a Fine Tip Marker
·
Medium
Strength Glue (recommended but not essential)