Configuration
© Life Racing Ltd
Page 14 of 45
4.2.3
Custom CAN Receive
Custom CAN is also available for communication with non Life Racing products. Receiving
items
should first be setup in the ‘Items’ tab to make them available in frame editing. In the
‘CANrx’ tab, create a blank frame by selecting Add Frame, Custom and following dialogue box
instructions to include ID and device. All custom CAN options will become available:
General
Message ID:
Frame identifier
29bit:
Allows 29bit addresses to be used.
Bus no:
Which bus the frame will be received on. CAN 1 or CAN 2.
Length:
Frame size in bytes.
Initial Timeout:
Time after power up allowed before timeout error.
Subsequent:
Time between received frames allowed before timeout error.
Beacon:
Ticking this box will result in a beacon event trigger when this frame is
received, regardless of content.
*Note*
It is recommended that the subsequent timeout period is made at least three times the length
of the expected reception period.
Frame content
Add Item:
Add an item to the selected frame.
Remove Item:
Delete the selected item.
Edit Item:
Select associated item from the list (items must first be added in the ‘
tab).
Mux Item:
Ticking this box makes the selected item an ID item. Assigning different ID
values to frames allows them to share message IDs.
