11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the ON/
OFF button on either the control panel (C) or
the remote control (B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater . This is a
normal function .
1
ON/OFF
C
B
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the
three heat settings .
Power for heat-up mode is 1,500 W; heat-
down is 1,000 W . ECO mode is an economic
energy saving function . When ECO mode is
chosen, the heater will operate to maintain a
constant warm 68°F .
2
HIGH
LOW
ECO
C
B
H / L / E
3 . Set the thermostat by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to
the temperature on the digital display . The
heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel
(C) to switch the digital display indicator on
the heater between Fahrenheit and Celsius .
3
C
B
C
OR
TEMP UP
TEMP.
UP
TEMP.
DOWN
TEMP DOWN
