16
LIFE | M7 X/M7 X UC NG
LifeIonizers.com/support
M7 X NG UC Installation
(under counter)
4. Connect the Cold
Water Connect to
the angle stop valve.
Then connect the
cold water line to the
Cold Water
Connect valve.
5. Close tight with
pliers.
6. Connect the 1/4”
tubing and open the
Cold Water Connect
valve. Turn the main
valve back on.
Source Water
** Highlighted plugs must be removed
before installation.
See page 18 for Quick Connect Fittings and Tubing instructions.
(help video on LifeIonizers.com/support)
Angle stop valve
Cold water connect valve
1. Find the raw water
valve under sink.
Turn the main valve
(angle stop) off.
2. Take off the cold
water line from the
angle stop valve as
pictured.
3. Totally disconnect
the line as shown
above.
IMPORTANT
COLD WaTeR CONNeCT
7. Run the ionizer and check for leaks at all tubing locations from the
Diverter Valve to the Ionizer itself before operating the unit.