8
Step 1
Connect the Sensor Cable III (33) from the Stabilizer (57) to the Sensor Cable II (32) from the Right Handlebar Support (31R).
Insert the Right Handlebar Support (31R) to the Stabilizer (57) with three
M8x16mm
Bolts (66) and M8 Spring Washers (74).
Repeat above step to assemble the Left Handlebar Support (31L) to the Stabilizer (57).
Careful not to crimp, pinch or otherwise damage the cable and cable connections.
Step 2
Connect the Sensor Cable II (32) from the Right Handlebar Support (31R) to the Sensor Cable I (29) from the Handlebar (68).
Step 3
Attach the Handlebar (68) onto the top of Right and Left Handlebar Supports (31R, 31L) with two
M8x50mm
Bolts (27).
Careful not to crimp, pinch or otherwise damage the cable and cable connections.
ASSEMBL
Y
INSTRUCTIONS
1
2
3
