10
Step 3
Connect the Sensor Cable (64) from the Right Handlebar Support Tube (17R) to the
Extension Sensor Cable (65) that comes from the Computer (1). It is recommended to
have a second person assist with this step. One person should hold the Computer (1) in
place while the other person connects the sensor cables.
Insert the Computer (1) onto the Right and Left Handlebar Support Tubes (17R, 17L) using
eight M8x12 Hexagon Socket Oval Head Bolts (13) and eight Ø8.5xØ16x1T Washers (79).
Tighten bolts with the Allen Wrench with Phillips Screwdriver provided.
Place the
Safety Tether Key (6) onto the Computer (1).
IMPORTANT:
While sliding the computer onto the right and left handlebar support tubes,
make sure the cables are installed inside the right handlebar support tube and pay
attention not to pinch the cables.
NOW
PLEASE FULLY TIGHTEN ALL BOLTS INSTALLED IN STEP 1 AND STEP 2
WITH THE ALLEN WRENCH WITH PHILLIPS SCREWDRIVER PROVIDED.
Hardware:
(13) Hexagon Socket Oval Head Bolt
M8x12
8 PCS
(79) Washer
Ø8.5xØ16x1T
8 PCS
6
1
4
4
13 79
17L
17R
13
79
65
64
65
64
Allen Wrench with
Phillips Screwdriver
Tool: