Life Gear 75163 Owner'S Manual Download Page 17 | Manualshive

Page: 17 / 25

background image

For added safety, a nylon strap has been included to restrict the degree of inversion. This strap
can be adjusted to different lengths to allow for a greater or lesser degree of inversion. To
lengthen the Strap (32) feed the top end of Strap (32) into the strap lock, and pull on the lower
end of the strap. To shorten the length feed the bottom end of Strap (32) into the strap lock, and
pull on the top end. See diagram.

ADJUSTING THE BOOM

The Adjustable Boom (3) can be moved to a variety of different positions, in order to
accommodate the height of the person on the machine. To Adjust the boom loosen the knob (30),
pull out the Large Spring Knob (18), and slide the boom up or down until the desired height on
the scale decal is positioned just below the Square Bushing (26). When the boom is in the desired
position, simply release the large spring knob, slide the boom slightly up or down until the spring
knob locks into place, and tighten the Knob (30).

OPERATION AND ADJUSTMENTS

16

SHORTEN

THE STRAP

LENGTHEN

«
...
15
16
17
18
19
...
»

Summary of Contents for 75163


























Reviews:

No comments

Related manuals for 75163

Brand: Parr Instrument Pages: 24

Brand: JBL Pages: 15

The Wave Transformer

Brand: EarthQuaker Devices Pages: 21

Brand: U-Line Pages: 9

Green Machine H-3518

Brand: U-Line Pages: 3

Brand: Tar River Pages: 26

Brand: ZOLL Pages: 38

Brand: ZOLL Pages: 36

Nature2 Fusion soft

Brand: Zodiac Pool Systems Pages: 52

Brand: Oliver Pages: 38

Brand: Zero88 Pages: 26

Brand: HAMOKI Pages: 7

Brand: H&S Pages: 56

Brand: MÄDLER Pages: 4

Brand: Martin Pages: 202

DependaBar DB-18-PCW

Brand: Healthcraft Pages: 13

Biosafe 110 Port

Brand: Sartorius Pages: 2

Brand: Delfield Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands