11
Step 2
Slide two Rubber Bumpers (39) onto the Weight Stack Sliding Rods (4). Then insert two
Weight Stack Sliding Rods (4) into the holes of the Weight Sliding Rod Tube (14) and secure
with two M10x20 Bolts (63). Tighten bolts with the Allen Wrench provided.
Attach the Main Support Tube (5) onto the Main Base Tube (2) with two M10x75 Hexagon
Head Bolts (67), two M10 Nylon Lock Nuts (60), and four Ø10 Washers (64).
Plastic Parts:
Hardware:
67
39
64
14
2
60
64
63
4
5
2 Wrenches (19-17)
Tool:
1 Allen Wrench (6mm)
2 Hexagon Head Bolts (M10x75)
4 Washers (Ø10)
2 Nylon Lock Nuts (M10)
2 Bolts (M10x20)
2 Rubber Bumpers
