Life Fitness OP-FS, Owner'S Manual

Page: 13 / 26

6. Place the handle through the wrist strap loop. Install bolts, washers, and hex nuts securing handle to front upright
using an 8mm Allen wrench and a 17mm socket wrench.
Item Description Qty.
1 Front Upright 1
2 Handle 1
3 Wrist Strap 1
4 M10 x 60mm Bolt 2
5 3/8" Flat Washer 4
6 M10 Hex Nylock Nut 2
Tighten bolts to 20-25 ft-lb (27-33 Nm).
7. Pull wrist strap loop up over the handle top and place placard plate down through it. Install bolts, washers, and
hex nuts securing placard plate to handle using an 8mm Allen wrench and a 17mm socket wrench.
Item Description Qty.
1 Placard Plate 1
2 Handle 1
3 3/8" Flat Washer 4
4 M10 Hex Nylock Nut 2
5 M10 x 25mm Bolt 2
Tighten bolts to 20-25 ft-lb (27-33 Nm).
NOTE: This is how the wrist strap should be appear once it has been installed.
Page 11 of 22