15
Lifecycle 9500HR / 9100 Series Recumbent Exercise Bikes
How To... REPLACE THE BATTERY(LC9500HR)
Tools Required:
Standard screwdriver
1. Tilt the bike on its side.
2. Disconnect the BLACK (neg) wire from the (-)
post on the BATTERY then the RED (pos) wire
from the (+) post.
3. Remove the two SCREWS securing the
BATTERY to the bracket. Remove the
BATTERY and discard.
4. Install new BATTERY and secure with the two
SCREWS.
5. Reconnect the BLACK (neg) wire to the (-) post
on the BATTERY, and the RED (pos) wire to
the (+) post. Carefully tuck the BATTERY
WIRES back into the HOUSING.
6.
Lift the bike to its upright position, and test all
operations.
Battery
Bracket
6V battery
Screws
32-35 IN. LBS.
Sectio
n III
Summary of Contents for Lifecycle upright 9500HR
