7.
Remove a screw and washer from the right handle assembly using two 7/32” Allen wrenches.
Item
Description
Qty
1
Screw
1
2
Washer
1
3
Handle Assembly, Right
1
4
Pivot Pin Assembly
1
5
Loctite #242
1
8.
Slide pivot pin assembly out and remove right handle assembly.
9.
Rotate right handle assembly 180 degrees.
10.
Apply Loctite to threads inside the pivot pin and screw.
11.
Place right handle assembly in position and slide pivot pin assembly back in place.
12.
Install the screw and washer to the right handle assembly using two 7/32” Allen wrenches.
Install Left Linkage Rod
1.
Pivot left handle assembly up and slide left linkage rod onto left arm.
Item
Description
Qty
1
Screw, Socket Head, .250-20 UNC-3A SS
1
10.2 Nm (90 in. lbs. minimum)
2
Loctite #242
1
3
Washer, Flat, .281 ID x .500 OD x .062”
1
4
Linkage Rod Cap 2.00 OD
1
5
Flange Spacer
1
6
Left Arm
1
7
Left Linkage Rod
1
2.
Place a drop of Loctite onto the screw.
3.
Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
4.
Tighten screw to a minimum of 90 in-lbs.
Page 37 of 47
