Life Fitness 8500 3, Assembly Instructions Manual

Page: 22 / 29

22
STEP 22:
FIGURE 22
• SECURELY assemble two 4-1/2” PULLEYS (48) into the slots of the TOP BOOM (30) using two 3/8 X 2-3/4” BOLTS (90), four 3/8” FLANGE
SPACERS (69), two 2-7/8” X 2-1/4” CABLE CLIPS (116) and two 3/8” LOCK NUTS (82). (NOTE: Loop the cable around each pulley prior to
inserting it in the the slot.)
0 1
2
3 4 5
6
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELY assemble one 4-1/2” PULLEY (48) to the FLOATING
PULLEY STOP (10) using one 3/8 X 2-3/4” BOLT (90), one 2-7/8” X
2-1/4” CABLE CLIP (116), two 3/8” FLANGE SPACERS (69), and
one 3/8” LOCK NUT (82) as shown in FIGURE 24.
FIGURE 23
FIGURE 24
STEP 23:
• SECURELY assemble one 4-1/2” PULLEY (48) to the FLOATING PULLEY BRACKET (55)
using one 3/8 X 2” BOLT (89), two 3/8” WASHERS (80), two 2-7/8 X 1” CABLE CLIPS (67) and
one 3/8” LOCK NUT (82) as shown in FIGURE 23.
STEP 24:
• Route the threaded end of the LAT CABLE (42) through the TOP BOOM (30) as shown in FIGURE 22.
3/8 X 2” 89
82
60
48
55
80
• Apply two 1 X 1” GLIDES (60) to the FLOATING PULLEY BRACKET (55) as shown.
82
LAT CABLE 42
48
82
48
11
69
90
3/8 X 2-3/4”
3/8 X 2-3/4” 90
30
69
116
67
116