Lifan PRO LF4000-CA, Operating Instructions And Owner'S Manual

Page: 44 / 80

43
Maintenance
SPARK PLUGMAINTENANCE:
1. Remove Spark Plug Cap (refer to "Spark Plug Cap Removal” figure below.)
2. Remove Spark Plug with socket and handle supplied with your unit (referto “Spark Plug Removal”
figure below.)
3. Clean anycarbon build-‐‐up around the SparkPlug.
4. Check the SparkPlugGap and adjust if necessary. 0.30-‐‐inch gap.
5. Lubricate the threads of theSparkPlugwith anti-‐‐seizecompound orengine oil.
6. Re-‐‐install the SparkPlug and SparkPlug Cap.
Spark Plug CapRemoval Spark PlugRemoval
FUEL SYSTEMMAINTENANCE:
NOTE: Periodically you can get sediment or trash in your Carburetor Bowl. Usethefollowing procedures to
clean:
1. Turn the fuel cock (valve) to the “OFF” Position.
2. Remove the carburetor bowl by removing the mounting bolt located atthebottom of the bowl.