Lifan PRO LF4000-CA, Operating Instructions And Owner'S Manual, Page: 34 / 80

33
PULL START (RECOIL) ONLYMODELS:
5. Place the On/Off switch in the “ON” (l)position.
6. Grasp starter handle and pull slowly until resistance is felt. Then pull the cord rapidly with a
full arm stroke. Allow the rope to return slowly. Do NOT allowtherope to snap back against
housing.
7. Once theengineruns for3-‐‐5 seconds, push thechoke pin in to disengage.
Operation ofGenerator
HOW TO USE YOURGENERATOR
ELECTRICT STARTMODELS:
5. For Electric Start Models, push the rocker switch to the “ON” position. Push rocker switch to start position
and hold until engine starts or for NO MORE than10engine rotations. If the engine does NOT start, wait 15
seconds and repeat starting procedures.
6. Once theengineruns for3-‐‐5 seconds, push thechoke pin in to disengage.
NOTE (all models): If generator does not start within FIVE pulls, check thecrankcaseoil level. The engines “Low Oil
Alarm System” may be activated and preventingtheengine from starting.
CONNECTING ELECTRICALLOADS: