Lifan lf200 III, Owner'S Manual

Page: 8 / 19

injecting .
OPTION OF THE LUBRICATION (FIG 15)
It is the main factor that the lubrication influences on
the performance of the engine and life ,at the same
time , influences on the emission of the motorcycle .
And so ,must according to the rules for selection and
lubrication of the changing . no using general engine
oil ,gear oil ,vegetable oil ,etc replacement .
When the motorcycles ex-factory with the engine oil
of the gasoline engine of 15w/40-SE grade ,whose optimal temperature is-
gasoline engine of API( USA petrol organization ) . if need change other lubrications
,whose the grade of the quality should come to SE grade ,adhensive degree should
select the reference caption according to the circumstances of the various regions
and weather changing . when change the lubrication ,please release the original lu-
brication of the camshaft till finishing.after cleaning , according to the rules injecting
the new lubrication.
If can not buy the engine oil of the gasoline engine of 15W/40-SE grade ,can make
use of RQB-10 #(temperature is below -10 e regions using HQB-6#) engine oil
instead .forbidding to use general engine oil &vegetable oil.
REMARKS:
FORBIDDING TO USE THE LUBRICATION OF OTHER BRANDS ,OTHERWISE
WILL DAMAGE TO ENGINE .
TYRES
Right tyre pressure will keep the optimal driving stability ,and driving comfortable ,
the durability of the tyres .
REMARKS;
No proper tyre pressure will give rise to the aberrant arasion of the tyre thread so that
cause security accidents . insufficient tyre pressure will cause tyres damaging &
wheel rim detached .
The standard of the air pressure of the tyre under the cooling state ( TABLE 1)
s/driving
d/driving
tyre specs
front wheel:175kpa
front wheel:225kpa
front wheel:80/100-18-47p
rear wheel:200kpa
rear wheel:225kpa
rear wheel:90/100-18-56p
before driving , when cooling t yre ,inspect th e ty re p ressure .i nspecting ty re p res-
sure whether has cutting print ,nails & other acute matter breaking in . inspecting
wheel rim whether has dent print &reduction .if find any status of the breakage ,
please go and come to maintenance station (point) repairing & changing.
when tyre thread of in the middle of the tyre come to the following figure ,please
change tyres( TABLE 2)
BEFORE DRIVING ,INSPECTING ITEMS
Before driving ,must inspect the motorcycle . the following items only need a few
minutes , can save the time of the maintenance failure during driving ,can guarantee
the driving security too.
1.check the oil level of the injecting lubrication of the engine in the light of
requirement ,inject the lubrication ,but inspect whether leak the fuel .
2.check the oil level of the fuel in the light of the requirement ,inject the fuel ,
but inspect whether leak oil .
3.before inspecting , the performance of rear brake before inspecting ,the situ-
ation of the movement of rear brake ,free stroke is big & small ,which should be
adjusted.
4.check the tyre before inspecting,the situation of air pressure of rear wheel
and arasion and impairing .
5.check battery electrolyte check the liquid level of the electrolyte
6.check the movement of the throttle inspect the movement of the throttle ,
connecting cable and the status of free stroke of the handlebar , when need badly ,
correct & change.
7.check illumulation and horn check headlight ,rear light ,position light ,steer-
ing light,indicator and the performance of the horn whether are good.
6
Fig.15
40
30
20
20W/40
25W/40
20W
15W/30
10W/20
-30 -20 -10 0 10 20 30 40 50
10W/30
15W
10W
5W/30
5W/20
5W
table 1
min limitation of the tyre thread depth(mm)
front wheel 1.5 rear wheel 2
table 2
10 e+40 e. without purchasing , can make use of SE ,SF &SC grade engine o f the