LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
19
Operation of Generator
HOW TO USE YOUR GENERATOR
(continued)
CONNECTING ELECTRICAL LOADS:
1.
Ensure engine is started and Green Indicator Light illuminates before plugging in
any electrical appliance.
2.
Plug in desired 120 Volt load to the 120 Volt U-‐Ground receptacles or the 120
Volt NEMA 14-‐30 twist lock receptacle. Always plug appliances into the
generator with appliance in its “OFF” position.
3.
Plug in 12V DC load to the DC receptacle. DC and AC power may be used
simultaneously. Circuit Breaker may need to be re-‐set before using 12V
receptacle. When charging 12V batteries, insert the charging plug into the DC
socket and then connect the terminals to the battery. After charging is
complete, remove battery terminal first, then un-‐plug charging plug from
generator. Remove the ground wire of Car Batteries prior to charging and re-‐
connect after charging is complete to avoid short circuit or spark.
4.
Do NOT connect 240 Volt loads to the 120 Volt receptacles.
5.
Only connects single-‐phase 60 Hertz loads.
6.
DO NOT OVERLOAD THE GENERATOR. FOLLOW THE PROVIDED “GENERATOR
WATTAGE REFERENCE WORKSHEET” TO DETERMINE THE RUNNING AND
STARTING WATTAGE OF YOUR EQUIPMENT, REFER TO THE PRODUCT
SPECIFICATIONS TO ENSURE YOUR GENERATOR WILL OPERATE THE DESIRED
EQUIPMENT.
NOTE:
Use the running and starting wattage provided by the equipment manufacturer
if available. If not available, use provided “Generator Wattage Reference Worksheet.”
