background image

VIN RECORD

 (Fig. 4-6)

Fuel Selection

Fuel is a key factor in deciding the exhaust
emissions from the engine, so selection of
fuel must follow the rules below. Selected
fuel must be unleaded gasoline with octane
No. RQ-90 or higher. Using improper fuel
could reduce performance, shorten the
engine’s service life.

Engine Oil Selection (Fig. 7)

The quality of the engine oil plays a vital
role in deciding the engine performance and
service. Engine oil must

VIN:

Engine code:

Fig. 5

Engine code

Nameplate

Fig. 6

Fig. 4

VIN

Fig. 7

    Fig. 3

Hand guard
Left handlebar controls

Meter and indicator

Front fairing

Right handlebar controls
Rear-view mirror

be selected in accordance with rules below and other
oils, such as ordinary engine oil, gear oil and vegetable oil, are forbidden to be
used.
The vehicle has been filled with engine oil SAE15W/40-SE before being
delivered.  The lubricant is only suitable at a temperature range within  10

40

. If other motor oil is to be used instead, the alternative must be

technically equivalent in every respect. Viscosity varies with regions and
temperatures, so the lubricant has to be selected according to our
recommendation.
If there is no gasoline engine oil SAE15W/40-SE, the engine oil No. HQB-10
(or HQB-6 in regions where the temperature is lower than

10

) can be

used instead.

NOTES

The VIN is stamped on the right side of the steering stem.
The engine code is stamped on the left-bottom of the crankcase.
The nameplate is fixed on the left side of the steering stem.

Please fill the VIN and engine code of your motorcycle in the blank below.
They will help order spare parts and find out the vehicle when stolen.

LF125GY-5改.p65

2012-3-1, 10:29

6

Summary of Contents for 125GY-5

























Reviews: