manualshive.com logo in svg

LIFAN Power USA 2V77F, Manual

Share
Download
LIFAN Power USA 2V77F Manual Download Page 2

 

 

1 

PREFACE 

Thank you for choosing the general gasoline engine produced by our company. 
Based  on  the  latest  technology  domestic  and  abroad, our  Company,  has  individually  developed general gasoline 

engine 2V77F  with 4-stroke, V-shaped cylinder, forced-air  cooling.  The  engine is characterized by advanced design, 
compact  structure,  reliable  performance,  convenient  maintain,  economic  use,  easy  speed  governing  etc.  It  is  widely 
used  as  ideal  power  in  many  fields  such  as  generator,  construction,  field  working

, 

forestry  machine,  etc.  The  main 

hardware,  such  as  crankcase,  crankcase  cover,  cylinder  all  use  aluminum  alloy.  Because  of  the  using  of  automatic 
decompression mechanism and centrifugal flyweight speed governor, the starting is very convenient and reliable. Other 
type use level sensitive protection system, avoiding the suddenly damage caused by bad lubrication.   

The  manual  gives  information  about  the  operation  and  maintenance  of  gasoline  engine  2V77F  and  2V77F-A. 

2V77F  is  started  by  electricity  while  2V77F-A  is  started  by  electricity  or  manual.  Please  read  it  carefully  before 
operating.  To  extend  the  service  life,  users  should  strictly  follow  the  stipulations  stated  in  the  manual  to  carry  out 
operating and maintenance. We have maintaining place on local place, it will supply offer you the service. 

This manual should be considered a permanent part of the engine and should remain with it if it is resold. 
All the materials and diagrams of this manual are in accordance with the newest products at the publishing time. 

Due to revision and other change, the information descried in this manual may be a little different from the actual status. 
The manual is subject to change without notice. 

The copyright of this manual belongs to our Co, any group or individual is forbidden to reprint or copy any it.   

 

 

Summary of Contents for 2V77F













































Reviews:

No comments

Brands by name

Popular brands

Load more brands