General Directions
Construction and Control
1.
Connection stud exhaust side ø 300 mm (12”)
2.
Main switch and linear airflow controller
3.
Differential pressure gauge
4.
Lifting handles (both sides)
5.
Fastening latches (both sides)
6.
Frame for bag filters
7.
Fastening piece and frame for G4 pre-filter
8.
Connection stud suction side ø 300 mm (12”)
Note: there is an 8 second
delay between switching
on the machine and the
start of the engine.
Differential
pressure gauge
Linear
airflow control
Main switch
Electric cable
1.
6.
7.
8.
3.
2.
5.
4.
1.
LIFA AirClean 3500 can only be used for the purposes that it
is designed for and which are outlined in the instructions. It is
forbidden to use the equipment for any other purpose without
written permission from the manufacturer. If this equipment is
used for a purpose other than in which it is designed for, the
manufacturer does not take the responsibility for any
consequences.
2.
Persons responsible for operating this equipment / supervising
the use of this equipment must get acquainted with the
structure, functions and the safe use of the equipment.
3.
It is prohibited to remove or disable any technical protective /
safety device while using the machine.
4.
If the machine must be installed in a way that protective / safety
device is disabled or device functioning is limited, work supervisor
/ person in charge must immediately be notified of this.
6
Lifa airClean 3500
7
