31/59 Gebruikershandleiding / User Manual / Bedienungsanleitung
P14E,
rev. 1.2: 16-03-20200
5.
Use a spindle (length 400mm) with a sawcut and wind a clean cloth of about 10 x 40 cm.
Ensure that the fabric is wound onto the spindle according to
figure 12
. This ensures that the
cloth comes into the corners of the vibrating cap..
Figure 11: Cloth and spindle with sawcut
Figure 12: Wrapping cleaning cloth correctly
6.
Insert completely into the vibrator-case until the cloth reaches the end. Only then let it spin
and slowly pull out of the vibrator case. Repeat a few times and inspect the cloth for dirt,
grease and stains. If the cloth is not completely clean repeat step 6 until it is.