Remote Network Operation
When connected to a Local Area Network (LAN) by means of the RJ-45 connector, the projector can
be controlled remotely through a Web browser by any of the clients (PCs connected to the LAN) on
the LAN. The projector can also be accessed outside the LAN, provided a firewall is configured ac-
cordingly.
Using a Static IP Address
Set the IP Setting to
Static IP Address
if you want the projector to have a permanent IP address.
The following screens may vary depending on the operating system you are using.
1.
From the
Local Area Connection
Properties
window, open the
Internet
Protocol (TCP/IP) Properties
window.
2.
Set the IP address:
10.0.50.99
3.
Set the Subnet mask:
255.0.0.0
4.
Click
OK
.
