M
AINTENANCE AND
S
ECURITY
Replacing the Projection Lamp
The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
1. The lamp contains a certain amount of mercury and should be disposed of according to local or-
dinance regulations.
2. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do
so could result in a severe burn.
1.
Remove the screw on
the lamp compartment
cover (
A
).
2.
Slide the lamp com-
partment cover to the
unlock position as
shown (
B
) and remove
it.
A
B
3.
Remove the two
screws from the lamp
module (
C
).
4.
Lift the module handle
up and pull up firmly
to remove the lamp
module (
D
).
C
C
D
