20
IoT Interworking
Make Your Life Smart
Security Code
1. The interface between the antenna and the gateway needs to be rotated and locked with a
flat-nose pliers, otherwise it may have a certain impact on the RF performance.
2. The direction of the GPS antenna needs to be perpendicular to the plane of the bottom plate of
the gateway, face outward and be parallel to the ground to ensure the quality of the GPS signal.
2.6 Power supply installation
Figure 7 Gateway power supply installation
Figure 8 Gateway power cord installation
2.6.1 Power supply body installation
As shown in Figure 7:
Place the output socket end of the power supply upward (marked with yellow box), make it close to
the
wall
of the bottom plate (marked with green box), align the hole with the bottom plate screw hole
(marked with red box), and tighten the screws.
2.6.2 Power cord installation
As shown in Figure 8:
Align the notch of the power cord interface with the protruding part of the gateway power
connector (marked with red box), insert and tighten.
