background image

Liebert PS UPS                                                                              Installation and User 
Manual 
 

 

Page 

 

V2.6 

Emerson Network Power 

 

 

2.4 Computer  Connection 

 
Plug the UPS into a 2-pole, 3-wire grounded receptacle. Then connect one 
computer-related device into each of the power receptacles supplied on the 
back of the UPS. 

 

 

2.5 Turn  On/Off 

Press the switch of the UPS continuously for 1 second and the UPS turns into its normal 
state (the green light is on and the beeper is off) after it performs a self-diagnosis (the 
beeper and the red and green indicator lights are on) for several seconds. At this time, 
user may turn on the PC and other loads. Press the switch of the UPS continuously for 1 
second to turn off the UPS. 

 

 

Note:

 

1. For the convenient maintenance, please turn on the UPS first before turning on the PC and the 

other loads, and turn off the UPS after the loads are turned off. 

2. At ordinary times, we recommend to keep the UPS on with the battery charging (even if the loads 

are turned off), this will help in the convenient maintenance of the battery. 

Summary of Contents for Liebert PS











Reviews: