21
Fig. 3 --- Lifting instructions with tubes CRH/SRH 004---016
LIFTING TUBE
(NOT SUPPLIED)
(BASE HOLES Ø45)
LIFTING SYSTEM WITH TUBES
BELT OR CHORD
BLOCKING PEG
(NOT SUPPLIED)
SPLIT PIN
(NOT SUPPLIED)
PART. “A”
N.B:
Place the lifting tubes in the holes in the base indicated by the words “LIFT HERE”. Lock the ends of the tubes in position with
the locking pins and split pins as shown above “A”.
The capacity of the lifting gear must be adequate to lift the load in question. Check the weight of the unit, the capacity of the
lifting gear and ropes and the condition and suitability of the aforementioned equipment. Lift the unit with a speed suitable
for the load to be moved, so as not to damage the structure.
PART. “A”
PROTECTION PLANK
RIGID STRUTS
(POSSIBILY STEEL)
PART. “A”
Lifting
Models
“L”
(mm)
“A”
(m)
“B”
(m)
“C”
(m)
CRH / SRH 004 - 204 - 006 - 206
2006
1.7
'
3.5
'
8.5
CRH / SRH 007 - 207 - 008 - 011
3006
1.7
'
4.5
'
8.5
CRH / SRH 014 - 016
4006
1.7
'
4.5
'
8.5
