background image

Ensuring The High Availability 
0f Mission-Critical Data And Applications. 

While every precaution has been taken to ensure the accuracy and completeness of this literature, Liebert Corporation assumes  
no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 
© 2006 Liebert Corporation 
All rights reserved throughout the world.  
Specifications subject to change without notice. 
® Liebert and the Liebert logo are registered trademarks of Liebert Corporation. All names referred to are trademarks or  
registered trademarks of their respective owners. 

Locations 

United States 

1050 Dearborn Drive 

P.O. Box 29186 

Columbus, OH 43229 

Europe 

Via Leonardo Da Vinci 8 

Zona Industriale Tognana 

35028 Piove Di Sacco (PD) Italy 

+39 049 9719 111 

Fax: +39 049 5841 257 

Asia 

7/F, Dah Sing Financial Centre 

108 Gloucester Road, Wanchai 

Hong Kong 

852 2572220 

Fax: 852 28029250 

The global leader in enabling Business-Critical Continuity

Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are 
trademarks and service marks of Emerson Electric Co. 

©2006 Emerson Electric Co. 

AC Power Systems 

Connectivity 

DC Power Systems 

Integrated Cabinet Solutions 

Embedded Computing 

Embedded Power 

Power Switching & Control 

Precision Cooling 

Outside Plant 

EmersonNetworkPower.com 

Services 

Site Monitoring 

Surge Protection 

Technical Support / Service 

Web Site 

www.liebert.com 

Monitoring 

800-222-5877 
[email protected] 
Outside the US: 614-841-6755 

Single-Phase UPS 

800-222-5877 
[email protected] 
Outside the US: 614-841-6755 

Three-Phase UPS 

800-543-2378 
[email protected] 

Environmental Systems 

800-543-2778 
Outside the United States 
614-888-0246 

Emerson Network Power.

  

SL-16610_REV2_08-06

Summary of Contents for Air Flow Enhander XDA

















Reviews: