background image

1

I

MPORTANT

 S

AFETY

 I

NSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety instructions that should be fol-

lowed during the installation and maintenance of the Uninterruptible 

Power System (UPS) and its batteries. Please read this manual thor-

oughly before attempting to install or operate this UPS.
Read all safety, installation, and operating instructions before operat-

ing the UPS. Adhere to all warnings on the unit and in this manual. 

Follow all operating and user instructions. 
This equipment is designed for Commercial, Industrial or Residential 

use. Liebert Corporation neither recommends nor knowingly sells this 

product for use in life support applications or with other designated 

critical devices.
This equipment can be installed and operated by individuals without 

previous training. 

 

!

WARNING

SAFETY PRECAUTIONS
• To prevent the risk of fire or electric shock, install the UPS 

in a temperature and humidity controlled room, free of 

conductive contaminants, moisture, flammable liquids, 

gases and corrosive substances.

• Operate the UPS only from a properly grounded (earthed) 

120VAC, 60Hz AC supply.

• To reduce the risk of electric shock, do not remove the 

cover, as it has no user-serviceable parts inside except the 

internal battery pack. Some components are live, even 

when AC power is disconnected. For service, contact a 

qualified technician.

Summary of Contents for 350-500 VA

























Reviews: