1.0 OVERVIEW
VW series counting scale is an intellectualized instrument offering all the weighing and
counting features required by industrial warehousing and production application. It
consists of a microprocessor, featuring stable and accurate counting, AC/DC power
supply, LCD display, low power consumption, and simple robust construction for factory
floor durability.
2.0 SAFETY NOTICE
It is important that Virtual Measurements & Control’s equipment is installed and
operated n such a way that all applicable safety requirements are met. It is your
responsibility as a user to ensure that you identify the relevant standards and comply
with them. Failure to do so may result in damages to equipment and personal injury. In
particular, you should review the ‘Precaution and safeguard’ instructions as indicated in
section 12.0 of this user guide carefully before installing or operating the equipment.
Under no circumstances will the supplier of the equipment be liable for any incidental,
consequential or special damages of any kind whatsoever, including but not limited to
lost profits arising from or in any way associated with the use of the equipment or this
user guide.
3.0
MAIN FEATURES
•
Beep function to indicate shortage of sample
•
Automatic zero tracing- abnormal zero digit alarm; overloading alarm;
•
Automatic shut-down in preset time;
•
Print out port: weight printing function available;
•
Large 12mm LCD display;
•
Signal indicators;
•
Stable indicator;
•
Backlight function;
•
AC/DC adapter
4.0
ACCURACY
The scale overall weighing accuracy is specified at ± 1 displayed graduation (d).
•
Linearity
± 1d
•
Repeatability
± 1d
•
Hysteresis
± 2d
