Page 12
Instruction Manual V1.3
1.7
Control Screen
Control Screen
1.7.1 READY
It indicates when the HVC-XXXX is ready for operation. When the unit is
ready, the READY indicator is lighted.
It doesn’t come to a ready status only turning AC beaker located on the rear
panel. After pressing Power On button, the unit will be ready status in 10 -30
seconds.
1.7.2 Enable/Disable
Pressing Enable/Disable button enables/disables the device (energizing
/disarms the device).
When the unit is powered on, it automatically turns to Enable mode after
Ready comes. To change the following operating mode however, Disable
button must be pressed before the change.
Otherwise, it can’t be changed: A
pop up note is displayed saying: “Press Disable button before changing this
s
election”.
Disable required before change:
1). Output Level Selection
1.7.3 Output Device Selection - Precise/Normal Mode
This is a disabled function for HVC-XXXX/USB series models.
