Page
12
of
15
Sand the ends of the carbon trussing rods
to give the glue a better hold.
The upper wing, foam struts, and wing
trussing can now be now be glued in place
using the tabs and slots provided.
Align the wing trussing with the spars in
the wing as shown and glue in place. Make
sure fuse and struts are square to wing.
Also put a dab of glue where the trusses
criss cross each other.
Attach the vertical aileron control rods
using the wire Z bends on the bottom and
the wire L bends on the top. Reheat the
shrink wrap to shorten or lengthen the
control rods. Use the two plastic EZ links
to lock the wire L bends in place.