Liberty Pumps 2LE Series Installation Manual Download Page 12

12 | EN

Copyright © Liberty Pumps, Inc. 2021 All rights reserved.

5459000C

Warranty

Liberty Engineered Products Limited Warranty

Liberty Pumps, Inc. warrants that pumps of its Engineered Product 

line are free from all factory defects in material and workmanship 

for a period of 18 months from the date of installation or 24 

months from the date of manufacture, whichever occurs first, and 

provided that such products are used in compliance with their 

intended applications as set forth in the Liberty Engineered 

Products specifications and technical manuals. The date of 

installation shall be determined by a completed pump start-up 

report and warranty registration form.
A pump startup report, filled out by a qualified installer, is 

required for warranty to take effect. The report must be submitted 

within 30 days from the installation date and submitted through 

the Liberty Pumps website. During the warranty period, the 

manufacturer's obligation, and at its discretion, shall be limited to 

the repair or replacement of any parts found by the manufacturer 

to be defective, provided the product is returned freight prepaid 

to the manufacturer or its authorized service center, and provided 

that none of the following warranty-voiding characteristics are 

evident:
The manufacturer shall not be liable under this Warranty if the 

product has not been properly installed or maintained in 

accordance with the printed instructions provided; if it has been 

disassembled, modified, abused or tampered with; if the pump 

discharge has been reduced in size; if the pump has been used in 

water temperatures above those shown in the specifications; if the 

thermal overload(s) and seal moisture probe(s) have not been 

properly connected (where equipped); if the pump has been used 

in water containing sand, lime, cement, gravel or other abrasives; 

if the product has been used to pump chemicals or hydrocarbons; 

if the product has been moved from its original installation 

location, or if the label bearing the serial and code number has 

been removed.
Liberty Pumps, Inc. shall not be liable for any loss, damage or 

expenses resulting from installation or use of its products, or for 

consequential damages, including field labor costs, travel 

expenses, rental equipment, costs of removal, reinstallation or 

transportation to and from the factory or an authorized Liberty 

Pumps repair facility.

There is no other express warranty. All implied warranties, 

including those of merchantability and fitness for a particular 

purpose, are limited to 18 months from the date of installation 

or 24 months from the manufacturing date. This Warranty 

contains the exclusive remedy of the purchaser, and, where 

permitted, liability for consequential or incidental damages 

under any and all warranties are excluded.

www.LibertyPumps.com/LEP/

Startup-WarrantyRegistration

7000 Apple Tree Avenue

Bergen, NY 14416

ph: 800-543-2550

fax: 585-494-1839

www.LibertyPumps.com/LEP

Summary of Contents for 2LE Series













Reviews: