4
CARE INSTRUCTIONS
Rust
Your hose reel will give you many seasons of reliable and functional hose storage. As with any steel
product, there is always the chance for rust developing over time. Your hose reel finish is designed for
industrial applications, but even the toughest of coatings can be compromised by scratches. Such minor
surface damage can occur in shipping despite our best efforts. We have found that most scratches
occur during assembly and/or installation (in the case of wall mounted hose reels). If the base metal is
exposed to the elements long enough, rust will develop. In the case of wall mounted reels, be sure to
use stainless steel mounting hardware. We recommend that you periodically inspect your reel for any
surface damage. Scratches can easily be repaired by using standard automotive touch-up body paint.
Some of our most loyal customers recommend that at the end of each season, the unit be cleaned and
painted with a clear acrylic paint.
Leaks
Your hose reel is manufactured with the finest quality components available. All components are
manufactured to rigorous quality standards not common in other consumer grade hose reels available
today. When you install your hose reel, be sure the hose washers are in place and all fittings are secure.
DO
NOT OVERTIGHTEN
as you might damage the components. If you live in more temperate
climates, be sure to drain the unit of any residual water before storing.
DO NOT EXPOSE THE UNIT TO
FREEZING TEMPERATURES
while water remains in the plumbing system.
Troubleshooting Guide
Problem:
Swivel head is not rotating, causing the leader hose to kink up.
Solution:
Remove leader hose and turn the square head of the swivel several times; apply lubricant.
Problem:
Leaking fixtures (galvanized tee, brass coupling, or swivel).
Solution:
Apply Teflon/Plumber's Tape and/or make sure fixtures are tightened.
TIPS
•
Drain water before storing.
•
DO NOT
drink water from the hose.
•
•
Turn off water after each use.
GROUND MOUNTING
Note
: Remember to use the correct size and quantity of hardware to properly support the total weight of the unit.
A standard 100' length of garden hose weighs approximately 15 lbs. Filled with water, the additional weight can exceed
20 lbs. The mounting hardware must be able to support the combined weight of the unit, garden hose, plus water.
Note:
Lubricating the bumpers with water or a light lubricant will ease the insertion.
DO NOT
leave water running though the hose reel while not in use or unsupervised.
Insert the four bumpers (B) provided into the mounting holes on the hose
reel base (E).
To secure the unit to the lawn or earth place the four stakes (A) through
the holes on the base of the unit (E).
B
E
B
