DL-SC41UP-BXTX Installation Guide
10
Connect Ethernet (Web Browser) Control (Optional)
The DL-SC41UP-BXTX can be controlled via Ethernet through a web browser interface.
The TCP/IP port requires a standard straight-through Category 5
or greater cable with the TIA/EIA-568B crimp pattern for optimal
operation.
The default settings for the TCP/IP port are:
IP address: 192.168.0.178,
Telnet Port 4001
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1
8
Connect the Ethernet cable between to the switcher and a
router with a straight-through cable or between the matrix and
a computer with a crossover cable.
Router Connection
1.
Configure the router to use the same IP range as the matrix, such as 192.168.0.1.
2.
Connect the computer to the router.
3.
Connect the DL-SC41UP-BXTX to the router
Web Browser Control
The DL-SC41UP-BXTX includes a web portal to allow control of the matrix via a standard web browser. The IP
address is the same address that is used for TCP/IP control.
Connect the included power cord to the DL-SC41UP-BXTX power port, connect the IEC power cord connected
to power supply to a local power source.
Applying Power
