DL-SC41UP-BXTX Installation Guide
8
Connect USB Hosts / Devices
Connect a PC USB port to either the PC/HOST 1 or PC/HOST 2 (bottom) to connect to devices connected to
the DL-SC41UP-BXTX USB hub. When using USB cables for USB host inputs, use a high quality USB 3.x cable no
longer than 5m or 16.4’. USB-C can also connect as the host, the USB-C host port supports USB 3.2 Gen1 up to
5Gbps. When using a USB-C cable be sure to use a 3.2 Gen1 USB cable.
Note:
By default the hosts will switch to follow video input automatically, HDMI 1 is associated with PC/HOST
1, PC/HOST 2 is associated with HDMI 2 and USB-C to USB-C. To change this manually or by USB activity
automatically, see page 18.
Connect a USB device to either the top or bottom USB devices ports. When using USB cables for 3.x USB devices,
use a high quality USB 3.x cable no longer than 5m or 16.4’. For any length over this specification please use a
USB extender.
Host Inputs
Device Inputs
Connect Display
HDMI Output
Connect display device to the HDMI output using a High Speed HDMI cable that is less than or equal to
5 meters in length for 4k60 signals and 8 meters for 1080p signals.
Connect a solid core CAT6 F/UTP rated category cable to the
DL-SC41UP-BXTX
HDBaseT output and the
optional HDBaseT receiver (DL-SCU-RX). Use TIA/EIA-568B wiring for Category 6 connection between
the
DL-SC41UP-BXTX
and the receiver. See page 11 for
HDBaseT Cabling Requirements.
Connect a display device to the HDMI output of the HDBaseT receiver using a High Speed HDMI cable
that is less than or equal to 5 meters in length for 4k60 signals and 8 meters for 1080p signals.
HDBaseT Output (Optional)
