background image

13

Battery Precautions

 

•Do not touch the two poles of the battery with your hands when the battery is removed for charging. Also, the 
two battery poles should not be touched with any metal or other material that conducts electricity.
•While charging, put the battery in a secure place where children can't reach.
•Do not use any charger other than the one that came with your Liberty Electric Bike. If you need another 
charger, contact your local dealer.
•Do not attempt to open or repair your charger. The electronics contain high-pressure circuits, so don’t 
dismantle by yourself.

•Prevent

 liquids, metal and metal filings from permeating the charger, and be careful to not drop or hit the 

charger which could cause damage.
•Do not put anything on top of the charger while charging. It must be well-ventilated to allow all the heat 
generated to dissipate.
•When charging, if there is a peculiar smell or the temperature is too high, please stop charging immediately.
•If the battery isn’t used for a long time, it should be charged once per month to ensure normal battery life. DO 
NOT use in the battery in a very low state.
•The charger will produce heat up to 

185°F 

(85

°

C)

 

in the course of using, so keep it away from flammable 

articles while using.
•It is normal that the mileage capacity will reduce as a result of low temperatures.
•While carrying the charger, DO NOT bump, drop, or damage, otherwise it may result in failure.
•Avoid any contact with water when charging your battery. If a plug or socket gets wet, dry it completely before 
using.
•Do not leave the charger connected to the battery and the outlet for extended periods of time.
•Always use the charger according to the instructions.

Battery Removal

                                                                                     .

Turn the key 

counterclockwise to 

unlock the battery.

Lift handle and pull out. When 

replacing the battery, don’t 

forget to lock it back in place.

Summary of Contents for 24v FoldNGo


















Reviews: