-11-
v7.0
Working mode
3. Working mode
The Libelium team has configured this device to be totally functional when the user receives the kit. In the case
that the user needs to change any parameter or configuration in the Adeunis FTD, the user guide from Adeunis
can be found on their website:
https://www.adeunis.com/en/produit/ftd-868-915-2/
From Libelium we strongly recommend not to try to configure the device without deep knowledge on LoRaWAN
networks. It is also recommended to get familiar to AT command if the user really wants to manipulate this
product in advanced mode.
3.1. Enroll the device on the Loriot backend
The Libelium team has already configured the module with all the required parameters to start working with the
Loriot backend from the moment the device is turned on.
The only configuration step left to the customer is the enrollment process of the device to the Loriot backend.
In order to receive the packets on the customer Loriot account, the user must register the device in her Loriot
customer account.
The device comes with a document with LoRaWAN parameters. They must be used in the registration process in
the “Adeunis Field Test Device Parameters” as follows:
Figure: Adeunis FTD parameters document
Customer must fill the form fields marked inside a red box with OTAA, the desired “title” and the previous
parameters. Device Location parameters are optional.
Figure: Enroll device
