Note:
These instructions do not cover all details or variations in equipment nor do they provide for every
possible situation during installation, operation or maintenance.
IMPORTANT
D
o not attempt to service the LED driver for reduce the risk of electric shock. The use of accessory equipment may
cause an unsafe condition. Do not use this product for other than intended use. Refer any servicing indicated by
these checks to a Qualified Service Personnel.
TROUBLESHOOTING
1
. Check that the line voltage at fixture is correct. Refer to wiring directions.
2. Be sure the fixture is grounded properly.
CLEANING
CAUTION: Be sure fixture temperature is co ol enough to touch. Do not clean or maintain while fixture is energized.
1
. Lens should be washed in a solution of warm water and any mild, non abrasive household detergent, rinsed with
clean water and wiped dry. Do not use chemicals to clean fixture.
2
. Do not open fixture to clean the LED. Do not touch the LED.
6) Place the Wired Housing over the Wall Mounting Box, close and tighten the
Surface Screw and Plastic stopper. Check Door Gasket.
LED Outdoor Security Light
LT-XT-06 Installation Instructions
③
