LGMG North America Inc. Maintenance Manual
8
Figure 1-5
Oil filter and oil drain plug
Replacement of the Engine Oil Filter
The engine oil filter element must also be
replaced every time the engine oil is replaced.
△
!
Never fill the filter in advance.
There is risk of contamination.
1)
If a torsion stopper is installed, remove the
clamping clamp (optional).
2)
Release and unscrew the filter element with
a wrench.
3)
Contain the oil that was drained.
4)
Clean the sealing surface of the filter holder
with a clean fiber-free wiper.
5)
Apply a thin layer of engine oil to the seal
ring of the new filter.
6)
Screw in a new filter manually until seal fit
and tighten it with 10-12 Nm.
1.9 Check for Fuel Leakage
△
!
The engine must be shut down!
No smoking and open fires!
Be careful when contacting high
temperature fuel!
Please observe the safety regulations for fuel
and relevant local regulations. Dispose of
spilled fuel and filter elements in accordance
with national regulations. The fuel cannot seep
into the ground.
Visually check for fuel leakage every 8 hours or
every day.
△
!
There is danger of explosion and
fire. The fuel of the engine is
combustible. Check the position of the
machine. When this step is performed,
the machine should be in a well-
ventilated area away from the heater,
spark, flame, and burning tobacco. A
qualified fire extinguisher shall be
placed in an easily accessible place.
△
!
There is danger of explosion and
fire. If fuel leaks, prevent any additional
person from entering the area or
operating the equipment. Repair the
leakage immediately.
1.10 Vent Fuel Pre-Filter
△
!
Risk of explosion and fire. Engine
fuel is combustible. The position
where the equipment is located shall
be inspected. When the step is
executed, equipment shall be located
in an open and well-ventilated area that
keeps away from the heater, spark,
flame and burning tobacco. A qualified
fire extinguisher shall be placed at the
location that is easily accessible.
△
!
Perform the step when the engine
flames out.
Go
to
Discount-Equipment.com
to
order
your
parts
