All
LGMAquari
's skimmers have been designed to be placed inside or outside a sump tank.
4
2. Positioning & Installation
Turn on the water intake pump connected to 2 and wait until water begins to overflow from the drain
outlet 5 . The drain outlet may be extended depending on your needs and/or deflected with specific
fittings. The drain outlet can be extended horizontally and/or vertically, but never upwards. The end of
the drain outlet must always be at least partially out of the water in case of use of an 90° joint while
may be partially immersed (up to 2cm- 1") in case of use of a “T" joint. The adjustment of the amount
of water treated and the levels must be done with all fittings mounted.
4. Water intake pump startup
3. Water direction
www.lgmaquari.it | [email protected]
Inside the Sump tank
Outside the Sump tank
Inside the Acquarium tank
!
Never install a system to pump water from the aquarium, through
the skimmer and back to a lower-levelled Sump.
If the return pump from Sump to the Aquarium get stuck, the Sump
tank will overflow and the Aquarium tank will be emptied.
Water flow back and forth the Aquarium
Water flow back and forth the Sump *
* Recommended configuration
The drain outlet must be always free from any obstruction.
!
!
v.1.1 ENG | 450~3000 | 03-2014
DANGER!
All power plugs MUST be dry! Never plug if wet!