LGB 55029, Manual

Page: 21 / 72

21
CV Assignment Range Note
54 Motor control: Control K 0 – 255
55 Motor control: Control I 0 – 255
56 Motor control: control influence 0 – 255
57
Sound:
Steam: Interval of steam chuffs at Speed Level 1
Diesel/electric locomotive: enter Value 1
0 – 255
58
Sound:
Steam: Interval of steam chuffs greater than Speed Level 1
Diesel/electric locomotive: enter Value 0
0 – 255
59 Sound when direction reversed 0 – 28 0 = no sound
60
Multi-station announcement
Bit 0 – 3 = Number of stations
Bit 4 = Last station inverts order
Bit 5 = Locomotive direction defines order
Bit 6 = Basic setting for order
0 – 126
61 Random sound: min. interval 0 – 255
62 Random sound: max. interval 0 – 255
63 Volume 0 – 255
64 Threshold for brake squealing 0 – 126
66 Forward trim 0 – 255
67 – 94 Speed table levels 1 – 28 0 – 255
95 Reverse trim 0 – 255
105 User recognition # 1 0 – 255
106 User recognition #2 0 – 255
112 Front light(s): Mode 0 – 21 see table "Operating Modes"
113 Front light(s): Dimmer 0 – 255 see table "Operating Modes"
114 Front light(s): Period 0 – 255 see table "Operating Modes"
115 On and Off Delay 0 – 255
Shutoff Delay:
Delay in Seconds = X
Turn on Delay:
Delay in Seconds * 16 = Y
Value = X + Y
116 – 119 Rear light(s) 0 – 255 (see CV 112 – 114)
120 – 143 AUX1 — AUX 6 0 – 255 ea. 3 CVs (see CV 112 – 114)
162 Running sound by speed level or load-dependent 0 – 255 0 = speed level
163 Brakes squealing, coasting correction 0 – 255
164 Brakes squealing, band width 0 – 255
165 Motor control: Control D 0 – 255 Differential part of the control
166 Motor control: Slow limit 0 – 255 Transition from 2-Point to PI
Control
167 Motor control: Slow K 0 – 255
168 Motor control: Slow I 0 – 255
169 Motor control: Slow D 0 – 255
170 Motor control: PWM Start 0 – 255
171 Motor control: EMK Max 0 – 255
172 Motor control: PWM Offset 0 – 255
176 Minimum speed, analog DC 0 – 255
177 Maximum speed, analog DC 0 – 255
178 Minimum speed, analog AC 0 – 255
179 Maximum speed, analog AC 0 – 255
248 Distance: Base voltage EMK 0 – 255 f(x)=a*x+b
a=Slope, b=Base voltage
249 Distance: Slope EMK 0 – 255
250 Distance: Gear ratio 0 – 255
Defines the ratio x motor rpm to
wheel speed. A wheel speed is
produced by x motor rpm