APPENDIX
76
PROGRAMMING THE REMOTE CONTROL
APPENDIX
■
This feature is not available for all models.
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
To find out whether your remote control can operate each
device without programming, turn on the device (such as a
VCR) and press the corresponding mode button on the remote.
After that, press the
PPO
OW
WEER
R
button. If the device is turned off
and it responds properly the remote control need not be pro-
grammed. If not, the remote should be programmed to operate
the device. The programming procedures are explained below.
Press the
M
MEEN
NU
U
and
M
MU
UT
TEE
button continuously at the same
time for two seconds; the currently selected device button is
illuminated.
If you don't press any button for 20 seconds, the light on the
mode button will be turned off. In that case, you have to repeat
from step 2.
Enter the appropriate code from the code table on the follow-
ing pages. When pressing the button, the light blinks at a time.
If the device turned off, the programming is successful.
Press the
M
MEEN
NU
U
button to store the code. After blinking twice,
this code is stored.
Test the remote control functions to see if the device responds
properly. If not, steps 2-5.
2
3
4
5
1
INPUT
FAV
MUTE
TV
STB
POWER
RETURN
MENU
ADJUST
PICTURE
SOUND
SAP
CC
RATIO
BRIGHT - TIMER
ENTER
VOL
CH
1
2
3
4
5
6
7
8
0
9
FLASHBK
P
A
G
E
DVD
VCR
