manualshive.com logo in svg

LG Zenith Free-To-Guest, Configuration

Share
Download
LG Zenith Free-To-Guest Configuration Download Page 10

10

Installer Menu Configuration

Using the FTG Configuration Application

The Installer Menu is used to configure the commercial features of the TV/STB.  Example Installer Menu Items are
Tuning Band, Tuning Mode, Start Channel, Aux source enable/disable, etc.  See Index tab of FTG Installer Menu
Configuration utility for entire list.  To use the FTG Installer Menu Configuration utility click 

‘Configure’

, then

‘Installer Menu’

.

Note: Detailed descriptions of Installer Menu items are provided in the TV/STB manual.

The Installer Menu Configuration utility allows access to changeable Installer Menu items 
(see table on pages 21 - 23).

Installer Menu Configuration Functions

Installer Menu Access is (Off/On)

– Allows access to TV/STB Installer Menu with IR remote.

Write

– The FTG Installer Menu Configuration is transferred to the FTG card and the TV/STB.

Read

– The FTG Installer Menu Configuration is transferred from the FTG card to the application.

Learn

– The TV/STB Installer Menu is "learned" from the TV/STB and transferred to the FTG card and application.

Exit

– Closes Installer Menu Configuration utility and returns to the main application window.

Summary of Contents for Zenith Free-To-Guest





























Reviews:

No comments

Brands by name

Popular brands

Load more brands