LG XD3*15 series Owner'S Manual Download

Page: 4 / 56

Installation

•

Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

•

If the power cord is damaged or the hole of the socket outlet is

loose, do not use the power cord and contact an authorized

service centre.

•

Do not modify the power cord provided with the appliance. Please

contact the LG Customer information centre to advise of its

incompatibility.

•

This appliance should only be transported by two or more people

holding the appliance securely.

•

Do not install the appliance in a damp and dusty place. Do not

install or store the appliance in any outdoor area, or any area that

is subject to weathering conditions such as direct sunlight, wind,

or rain or temperatures below freezing.

•

Do not plug multiple socket outlets, an extension power cable or

adapter with this appliance.

•

Disconnect the power cord, house fuse or circuit breaker before

installing or servicing the appliance.

•

When moving or installing the product in a different location, call

qualified service personnel for installation and service.

•

Fix the drain hose securely in place.

•

This appliance is not designed for maritime use or for mobile

installations such as in RVs, trailers, or aircraft.

•

This appliance must be positioned near to an electrical power

supply.

•

When installing or moving the appliance, be careful not to pinch,

crush, or damage the power cord.

Summary of Contents for XD3*15 series

























































Search results

Summary of Contents for XD3*15 series

Reviews:

Related manuals for XD3*15 series

Brands by name

Popular brands

LG XD3*15 series, Owner'S Manual

Search results

Summary of Contents for XD3*15 series

Reviews:

Related manuals for XD3*15 series

Brands by name

Popular brands