DVD Micro Hi-Fi System
]
USER GUIDE
5
Attaching the speakers to the unit
Connect the wires to the unit.
Match each wire’s coloured band to the same coloured connection terminal on
the reverse of the unit.
To connect the cable to the unit, press each plastic finger pad to open
the connection terminal. Insert the wire and release the finger pad
The connector will open ready to receive a cable.
Setting up
XD533 MODEL
Grey
Blue
Green
Orange
Red
White
Rear
Rear
Centre
Sub Woofer
Front
Front
Behind you and to your right
Behind you and to your left
Above screen, directly in front of you.
In front of you, to the right of
the screen
In front of you, to the left of
the screen
POSITION
SPEAKER
COLOUR
Red
White
Front
Front
In front of you, to the right of
the screen
In front of you, to the left of
the screen
POSITION
SPEAKER
COLOUR
XD203 MODEL
Remote control Operation
Point the Remote Control at the remote sensor and press the buttons.
Remote control Battery Installation
Detach the battery cover on the rear of the remote control, and insert two
R03 (size AAA) batteries with
3
and
#
aligned correctly.
Do not mix old and new batteries. Never mix different types of batteries (stan-
dard, alkaline, etc.).
Connect the red end of each wire to the terminals (plus) and the
black end to the terminals marked - (minus).
To connect the cable to the center speakers, press each plastic finger pad to
open the connection terminals on the back of center speaker. Insert the wire
and release the finger pad. (Only XD533)
Connect the red end of each wire to the termi-
nals (plus) and the black end to the
terminals marked - (minus).
Be careful of the following
• Be careful to make sure children not to put their hands or any objects into the
speaker duct.
• Speaker duct : A hall for plentiful bass sound on speaker cabinet (enclosure).
XD533_203-A0U_ENG_LGEOK_8845 8/21/08 9:55 AM Page 5
