6
3
#
Setting up
1
1
Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus). Cables from the right-
hand speaker are connected to the terminal marked R (right)
+ (plus) and - (minus).
To connect the cable to the player, press each of the four
square plastic finger pads on the rear of the player.
The connector will open ready to receive a cable.
Put the battery in the remote control
Make sure that the + (plus) and - (minus) on the
battery (size AAA) match those on the remote
control.
2
2
Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
3
3
Connect the FM aerial
The reception will be at its best when the two loose
ends of the aerial are in a straight line and horizontal.
4
4
Plug the power plug into a wall socket
