9
EN
INSTALLATION
Before Installation
Before installing the appliance, check the following information to
make sure that the appliance should be installed correctly. Failure to
follow the instruction may cause malfunctions.
•
Keep the clearance of over 10 cm between all sides (rear, right and left sides) of the appliance and the
wall for proper ventilation.
•
When connecting the water hose, do not connect it to the hot water tap.
•
Check the pipe and hose connection for leaks. Water can leak and cause electric shock or injury.
•
When transporting the appliance, do not tilt the appliance over 30 degrees.
•
Install the appliance inside with a surrounding temperature of over 5 °C and less than 35 °C.
•
Connect the appliance to a drinking water tap with a water pressure of 147 - 780 kPa (1.5 - 7.9 kgf/cm
2
).
•
When installing the appliance, avoid the location close to a toilet or in front of air conditioner.
•
Connect the power supply cord (or plug) to the outlet. Don’t double up with other appliances on the
same outlet.
•
After installing the appliance, connect the power plug into a socket outlet. Before moving and discarding
the appliance, disconnect the plug from the socket outlet.
Outlet with a ground terminal
•
If the
outlet
has a ground terminal, no additional grounding is required.
Outlet without a grounding terminal
•
Check if the circuit breaker is installed. If not, ask a special technician to install it before using the
appliance.