- 8 -
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
■
M1003L/M1203L
POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
OPERATION MODE SELECTION BUTTON
Every time you push this button, it will toggle between COOL, FAN and DRY as follows.
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to
86°F by 1°F. (16°C to 30°C by 1°C)
Select the lower number for lower temperature of the room.
FAN SPEED SELECTOR
Every time you push this button, it is set as follows.
(Hi
➔
Low
➔
Mid
➔
Hi
➔
Low
➔
...)
ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If the unit is operating,
this button controls the time it will be turned off. If the unit is off state, this button controls the time it will start. Every time
you push this button, the remaining time will be set as follows.
- Stopping operation
(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
8Hours
➔
9Hours
➔
10Hours
➔
11Hours
➔
12Hours
➔
0Hour
➔
1Hour
➔
2Hours
➔
... )
- Starting operation
(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
8Hours
➔
9Hours
➔
10Hours
➔
11Hours
➔
12Hours
➔
off
➔
1Hour
➔
2Hours
➔
... )
AUTO SWING
This button can automatically control the air flow direction.
SLEEP MODE BUTTON
Press the sleep mode button to set the time you want the unit to turn off automatically. The timer is programmed in one
hour increment by pressing the button. Every time you push this button, the remaining time will be set as follows.(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
0Hour
➔
1Hour
➔
2Hours
➔
... )
Note:
The Sleep Mode will be operated at low fan speed for quiet sleeping. The temperature will automatically rise by 1°C
over the next 30 minutes and by 2°C in 1 hour for comfortble sleeping.
ENERGY SAVER
If you push this button, the fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn
on and check the room air temperature to determine if cooling is necessary.
REMOCON SIGNAL RECEIVER
6
6
7
7
8
8
9
9
Precaution:
The Remote Control unit will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
REMOTE CONTROL
DISPLAY
Power
Temp
Fan Speed
Sleep
Mode
Energy
Saver
Auto
Swing
1
2
6
4
7
8
3
1
3
9
2
4
8
6
7
5
